Operation
Procedures
- Before disinfecting, the bottles,
teats, etc, must be cleaned and drained well.
- Use the feeding bottles to measure
70-75 ml of fresh water, pour the water into the heating bowl.
- Put the feeding bottles into the
plastic container. The mouth of feeding bottles should be placed at the bottom of the
plastic container.
- Put the lid on the top of container.
- Insert the plug into socket. The
indicator light will turn on.
- When the water is boiled dry, the
buzzer will sound and the steriliser will turn off automatically.
- After the buzzer sounds, unplug the
steriliser from the mains.
- When you open the lid, you should be
careful because the steam is HOT!
Note:
Utensils, and other items can also be disinfected, no condition that they are heat and
water-proof.
Boil out the appliance once with clean water before the first use. |
Importance
- Use 220-240V alternating currently
only.
- Always unplug the steriliser after
use or before cleaning.
- Do not immerse the steriliser in
water but you may clean it by damp cloth.
- The steriliser becomes hot during
use and steam comes out of the opening in the lid.
- Keep away from children. They may
get burned.
- Do not use scouring agents,
abrasives or hard objects during cleaning.
- Do not add sterilizing or other
chemical additives during boiling.
- If the machine or power supply cord
is damaged, it must be repaired by the qualified technicians.
- Do not over fill the plate.
|
